Door Handle Replacement
Door handles seem like something minor but if you aren't happy with the appearance of the handles or are finding them difficult to use then it's time to replace them. Installing a new door handle is easy if you have patience.
Modern door handles are often equipped with cover plates which hide the screws for an attractive appearance. If your new handle does not have screws already attached, you will have to attach them separately.
Remove the handle that was previously used
The door handle is not only a decoration for your home It's also an element of security that allows you to lock and unlock your door. As time passes the door handle can begin to lose its grip or feel a bit loose. It may also begin to look aged and worn. This is an indication that it's the time to replace your door handle.
If your door handle is becoming difficult to use, it may be time to replace it. This is a serious problem as you will no longer be able to lock or unlock the door, which could put you and your family at risk.
door handle repairs 's also a good idea to replace your door handle when it's damaged or broken. A damaged or broken door handle can be risky, particularly for elderly or children members who may struggle to open it. They may get trapped. Fortunately, it's fairly simple to fix a damaged door handle by replacing the handle that was broken.
The majority of modern door handles are standard size, so they should fit any door. If you aren't certain that your new door handle will work, take off the old one and take measurements of its holes in the housing. This will let you buy the right size door handle.
The easiest way to take off the door handle you have been using is to remove it from the door itself. Usually you'll need a screwdriver. However certain door handles come with an outer cover plate that hides the mounting screws, so you'll need to remove this cover plate to get access to the screws underneath. Once you've removed your old handle, make note of the way the spindle is positioned to ensure that you can be sure to align it when you install your new one.
You can also remove the door handle by removing the latch mechanism. You can use a screwdriver to remove the door handle. However, you will have to locate the small latch which is located on the edge trim piece. After removing the latch, unscrew the handle and strike plate. Then remove the latch from the edge of the door.
Take off the Strike Plate
When you replace your handle, you'll want to replace the latch plate, which is the hole that the door's latch is inserted into when it closes. The box that the new handles arrive in will include two options for latch plates - one that is rectangular and the other a circular one (see the diagram above detailing door handle parts). If you have a rectangular latch plate, swap it with a round one. This will allow the latch to be able to hook into the strike plate and make the handle more convenient.
The first step is to remove the screw that is holding the old latch plate. These screws are often tight and will require some force to loosen. If possible, it may be helpful to have another person help with this process.
The latch plate should easily lift itself out of the door once the screws have been removed. If it is stuck or doesn't move using a nail file to scrape the edges of the latch plate. This will sometimes free the plate.
Now you can prepare the new strike plate to be installed. Utilizing the screws made of wood that came with the new handles, attach the latch plate to the inside of the doorjamb. Do not tighten the screws too much as this could cause damage to the strike plate.
If you are not sure whether the latch plate is in its correct position, shut and then open the door to see if it latches and closes properly. If it does not, you will need to adjust the strikeplate upwards or down, or forward or back until the door shuts correctly.
If the door still moves or jiggles, you might have to expand your latch hole on the strike plate. This is more prevalent in older doors, however it can happen due to wear and tear hinge mortises that are not deep enough or are not sized correctly for the latch, or due to damaged or broken strike plate that is damaged or broken. If this is the case then you should use a filing made of metal instead of a chisel or hammer to adjust the strike plate.
Eliminating the Latch
The latch is a curved metal piece which slides in and out of a hole on the inside of your door. The latch moves forward when you turn the handle. It also connects to a hole in the frame of the door to keep the door shut. If your door is wiggles when you close it, replacing the latch could be all you need to fix it.
The screws that hold the door latch are hard to spot, but you can usually insert a screwdriver into an insignificant hole on the trim plate and then pry the latch off. After removing the trim plate, you should be able to take off the latch and the bolts that hold it, as well as the spindle in position.
If the latch cannot be easily removed, use a paperclip or tool to take it off the handle mechanism. Insert the item into the latch's slot that is recessed and gently turn or jiggle it until you feel the latch and handle start to separate. It is possible to repeat this procedure several times before you can take the latch off.
You should be able to slide the new latch into its slot without issues after you've removed the old one. Make use of the new screws to connect the latch to the strike plate or door frame. Make sure it's correctly placed in the slot, aligned with the screw chambers.
Measure the existing backset (the distance between the center of the large hole on the front of the door and the edge) prior to installing the new handle. Check that the latch size of the new handle is equal to the measurement.
If you are replacing the handle or latch or handle, or if the old lock cylinder has been damaged, then you'll need a new one. If you're not changing locks the new lock will fit in your existing recess, and work with your existing keys. Choose a latch that has rectangular cover plates that match your old handles.
Removing the Cover Plate
You can replace your old door handles with a contemporary rose and lever designs to enhance the appearance of your house. You can buy complete sets that include matching escutcheons and privacy adaptor kits.
The first step in replacing an internal door handle is to remove the cover plate or rose, which hides the screws and inner mechanism. Use a flathead to remove the cover plate. It may have an opening on one edge or be secured by pins.
Remove the screw that holds the handle inside and set it aside once the cover plate has been removed. It is also necessary to remove the screws that hold the latch and inner plates and the latch plate, which can be done by loosening them using the help of a Philips screwdriver. Then, take the inner plates and latch plate from the door and put them aside.
Some doors don't have this gap. If yours isn't, you will need to make a hole into the door. This is the same process as opening a door locked, but you will need to be extra careful not to damage the door or frame.
After the holes are drilled after which you'll have to put in new door knob screws. Make sure to buy the same size as the previous ones, to ensure that you do not end up with the handle that is too tight or loose. You'll also have to install a new latch plate and strike rod that aren't included in most door handle sets.
If you're in search of a reliable replacement for your interior door handle set, try the Amazon's Choice FAERSI two-piece chrome-finished handle set. It's a factory-fit and has received a plethora of five-star reviews from delighted customers. It's an excellent option for replacing worn out or damaged interior door hardware on your Chevy.